Door Number Flower Box

By RYOBI Nation

SKILL
easy

Brighten up your front porch with this easy DIY Door Number Flower Box!

Download Plans

Tools

  • 18V ONE+ 5" Random Orbit Sander
  • 18V ONE+ HP Brushless Air Strike 18 GA Brad Nailer
  • 18V ONE+ HP Brushless 1/2" Drill/Driver

Accessories

  • 7 PC. 5" RANDOM ORBIT SANDER SAND PAPER
  • Black Oxide Drill Bit Set (21-Piece) and Impact Rated Driving Kit (40-Piece)

Materials

  • 1-1/2" 18 Gauge Collated Nails
  • 1" x 6" x 8' Wood Board
  • 4" House Numbers
  • Paint
Download Plans

Steps

Step 1

Cut out all material using the Lumber & Cut Layout Guide

Tools

Miter Saw, Tape Measure

Materials

1" x 6" x 8' Wood Board
Step 1

Step 2

Align the edge of the bottom board to the back board. Glue and nail together.

Tools

Brad Nailer

Materials

Wood Glue, 1-1/2" x 18-Gauge Collated Nails
Step 2

Step 3

Take (1) side piece and align it to the side of the back and bottom boards. Glue and nail together.

Tools

Brad Nailer

Materials

Wood Glue, 1-1/2" x 18-Gauge Collated Nails
Step 3

Step 4

Repeat Step 3 and attach the opposite side piece. Glue and nail together.

Tools

Brad Nailer

Materials

Wood Glue, 1-1/2" x 18-Gauge Collated Nails
Step 4

Step 5

Align the front piece to the assembly. Glue and nail together.

Tools

Brad Nailer

Materials

Wood Glue, 1-1/2" x 18-Gauge Collated Nails
Step 5

Step 6

Fill nail holes and sand. Seal or paint as desired.

Tools

Sander, Sand Paper

Materials

Paint
Step 6

Step 7

Install numbers to the center of the back board.

Tools

Drill

Materials

4" House Numbers
Step 7